Wheel Well Guards 2015 Subaru Outback
BORN IN THE USA MADE IN THE USA
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Product Features / Videos
LEAVES NO ROOM FOR RUST & WEAR
- An unwavering barrier for rocks, rust, mud, snow and salt
- Lasting protection for everything behind the wheels
HUSKY TOUGHNESS BEHIND EVERY WHEEL
- Super-tough, Impact-resistant, all-weather thermoplastic material
- Low-maintenance, built to last
SIMPLE TO INSTALL
- Easy to install in just a few minutes
- Amped up custom look for your truck
HOSE DOWN, DRIVE OFF
- Easy to clean, just spray ‘em down and you’re back on the road
- Material designed to shed grit and debris
Guaranteed...FOR LIFE.
Designed and Manufactured
in the USA.
Steve Bower, Engineering Manager
Thank you for your review and thank you for choosing Husky Liner products! Please do give us a call regarding this purchase. One of the Engineering staff members spoke with you regarding a Super Duty truck, but the part listed here is for an F150--and the parts would not be interchangeable. Our number is 800-344-8759 or you can e-mail us at customerservice@huskyliners.com.
Steve Bower, Engineering Manager
Thank you for your review and thank you for choosing Husky Liner products! The F150 wheel well guards should not require any drilling. Please note that the parts are nearly identical in shape and you can easily place the driver’s on the passenger side and vice versa. The two parts do have a molded in “DS” and “PS”, but it is not overly large and you could overlook it. Beyond that we are not aware of any fitment issues. It is a large part and can get a little squeezed in the packaging -- for that reason we do suggest not tightening any of the fasteners until they are all in place. I would seem that you already have the part installed so I do not know if you would want to remove it. You may be able to see the stamped in DS and PS indications though. Please do call us at 800-344-8759 or e-mail me at sbower@huskyliners.com as I would like to have more information on this fitment issue.
Steve Bower, Engineering Manager
Thank you for your review and for choosing Husky Liner products! The Wheel Well Guard for the new F150 is “side specific”—though the parts will physically fit either side. We do mold in a mark notating the “PS“ and “DS” sides. If a part is installed on the wrong side the holes would not line up. Please do contact us at 800-344-8759 or e-mail me at sbower@huskyliners.com if you have any question/concerns related to installation of your product.
Steve Bower, Engineering Manager
Thank you for your review and for choosing Husky Liner products! We are not aware of any issues with the installation of the Wheel Well Guards on a 2013 F150. If your Wheel Well Guards are not fitting as expected please contact us at customerservice@huskyliners.com or call us at 800-344-8759. We only charge $10 per boxed item for orders shipped to Canada. Any extra cost is related to taxes levied by the Canadian & Provincial governments and import duties. We use the US Postal Service where possible as they have the lowest duty structure. Unfortunately, USPS has a size limit and very large items must ship via UPS or FedEx.
While going thru the install I noticed Cut Out Circular Notches on the liners and sure enough, they lined up perfectly with the Pre-Drilled Factory Holes and herein lye's the problem, The Metal Spring Clips referenced above were not large enough to capture the liner to secure them, not even close so they were virtually useless. The liners should NOT have had these Circular Cutouts made at all or provide securing mechanisms that would actually work and, not create a situation for chafing and corrosion. I had to spend much more time than necessary to devise a way to get these liners secured to my wheel well and I am still uncertain they will sustain the rigors of New England Winters. My rating is legitimate, if you own a F250 or 350 2015 or 2016 model and know what I have encountered and have a solid solution I would love to hear it.
Steve Bower, Engineering Manager
Thank you for your review and thank you for choosing Husky Liner products! The Wheel Well Guard (WWG) is not designed to be attached to the screws where you describe trying to attach them. Not all trucks have the wheel lip molding so not all trucks would have screws in these locations. We purposefully notched out the WWG so it would fit around these screws. For that reason you would not be able to attach the u-clips at these locations. Per the instructions the u-clips are only used as a back-up nut to further secure the WWG in the “A” and “D” locations as described in the instructions , here is a link to those (https://www.huskyliners.com/images/ePIM/original/7911INS_R1.pdf. Please do call us at 800-344-8759 or e-mail me rgroene@huskyliners.com at your convenience to further discuss this. As always, if you are installing a product and have any question at all please do contact us with any questions at that time.
Steve Bower, Engineering Manager
Thank you for your review and thank you for choosing Husky Liner products! The Wheel Well Guards are made from a blend of two materials that give the product the properties needed to withstand the day-to-day abuse of driving on any type of surface. The Wheel Well Guards do have our lifetime warranty and are designed to last that long. Please do call us at 800-344-8759 or e-mail me at sbower@huskyliners.com if you have any further questions or concerns.